Friday, June 30, 2017

securityonion-setup - 20120912-0ubuntu0securityonion234 now available for Security Onion!

The following package is now available:
securityonion-setup - 20120912-0ubuntu0securityonion234

This package should resolve the following issue:

Issue 1106: Update so-allow to allow apt-cacher-ng clients and add so-disallow
https://github.com/Security-Onion-Solutions/security-onion/issues/1106

Thanks
Thanks to Wes Lambert for submitting the pull request and testing the new package!

Updating
These packages are now available in our stable repo.  Please see the following page for full update instructions:
https://securityonion.net/wiki/Upgrade

Want to show your support for Security Onion?
Security Onion t-shirts are available in our CafePress store!
http://www.cafepress.com/securityonion/11820053

Conference
Security Onion Conference will be on Friday September 15 in beautiful Augusta, GA!
https://securityonion.net/conference

Training
Need training?  Please see:
https://securityonionsolutions.com

Support
Need support?  Please see:
https://securityonion.net/wiki/Support

Thanks!

Thursday, June 29, 2017

securityonion-nsmnow-admin-scripts - 20120724-0ubuntu0securityonion156 now available for Security Onion!

The following package is now available:
securityonion-nsmnow-admin-scripts - 20120724-0ubuntu0securityonion156

This package should resolve the following issue:

NSM: stderr redirects when listing logfiles #1086
https://github.com/Security-Onion-Solutions/security-onion/issues/1086

Thanks
Thanks to Pete Nelson for submitting the pull request and to the following for testing the new package:
Wes Lambert
Pete Nelson

Updating
These packages are now available in our stable repo.  Please see the following page for full update instructions:
https://securityonion.net/wiki/Upgrade

Want to show your support for Security Onion?
Security Onion t-shirts are available in our CafePress store!
http://www.cafepress.com/securityonion/11820053

Conference
Security Onion Conference will be on Friday September 15 in beautiful Augusta, GA!
https://securityonion.net/conference

Training
Need training?  Please see:
https://securityonionsolutions.com

Support
Need support?  Please see:
https://securityonion.net/wiki/Support

Thanks!

Security Onion Conference 2017 Registration is open!

Registration is now open for Security Onion Conference 2017!  For more details and to register, please see:
https://securityonion.net/conference

Wednesday, June 28, 2017

securityonion-sostat - 20120722-0ubuntu0securityonion71 now available for Security Onion!

The following package is now available:

securityonion-sostat - 20120722-0ubuntu0securityonion71

This new package should resolve the following issues:

sostat: netsniff-ng log section can get quite lengthy #1021
https://github.com/Security-Onion-Solutions/security-onion/issues/1021

sostat: check for stuck ELSA cron.pl #1061
https://github.com/Security-Onion-Solutions/security-onion/issues/1061

sostat: calculate netsniff-ng packet drops as percentage #1107
https://github.com/Security-Onion-Solutions/security-onion/issues/1107

These packages have been tested by the following (thanks!):
Wes Lambert
Rob Bardo

Updating
These packages are now available in our stable repo.  Please see the following page for full update instructions:
https://securityonion.net/wiki/Upgrade

Want to show your support for Security Onion?
Security Onion t-shirts are available in our CafePress store!
http://www.cafepress.com/securityonion/11820053

Conference
Security Onion Conference will be on Friday September 15 in beautiful Augusta, GA!
https://securityonion.net/conference

Training
Need training?  Please see:
https://securityonionsolutions.com

Support
Need support?  Please see:
https://securityonion.net/wiki/Support

Thanks!

Tuesday, June 27, 2017

PF_RING 6.6.0 and Suricata 3.2.2 now available for Security Onion!

The following software was recently released:

PF_RING 6.6.0:
http://www.ntop.org/pf_ring/pf_ring-6-6-just-released/

Suricata 3.2.2
https://suricata-ids.org/2017/06/07/suricata-3-2-2-available/

The following packages are now available:

securityonion-daq - 2.0.6-0ubuntu0securityonion7
securityonion-pfring-daq - 20121107-0ubuntu0securityonion14
securityonion-pfring-devel - 20121107-0ubuntu0securityonion11
securityonion-pfring-ld - 20120827-0ubuntu0securityonion11
securityonion-pfring-module - 20121107-0ubuntu0securityonion29
securityonion-pfring-userland - 20170619-1ubuntu1securityonion2
securityonion-suricata - 3.2.2-1ubuntu1securityonion1

These new packages should resolve the following issues:

Issue 1101: PF_RING 6.6.0
https://github.com/Security-Onion-Solutions/security-onion/issues/1101

Issue 1102: Suricata 3.2.2
https://github.com/Security-Onion-Solutions/security-onion/issues/1102

These packages have been tested by the following (thanks!):
Wes Lambert
Kevin Branch
Rob Bardo

Updating
These packages are now available in our stable repo.  Please see the following page for full update instructions:
https://securityonion.net/wiki/Upgrade

Want to show your support for Security Onion?
Security Onion t-shirts are available in our CafePress store!
http://www.cafepress.com/securityonion/11820053

Conference
Security Onion Conference will be on Friday September 15 in beautiful Augusta, GA!
https://securityonion.net/conference

Training
Need training?  Please see:
https://securityonionsolutions.com

Support
Need support?  Please see:
https://securityonion.net/wiki/Support

Thanks!

Thursday, June 15, 2017

Quick Intro to Security Onion Elastic Stack Technology Preview 2

Here's a video showing the installation of Security Onion Elastic Stack Technology Preview 2 and a brief introduction to the interface and workflow:
https://www.youtube.com/playlist?list=PLljFlTO9rB15SMpdBpLi084FiTBJsBjXZ

We'd love your feedback!  Please send it to our mailing list:
https://github.com/Security-Onion-Solutions/security-onion/wiki/MailingLists

Thanks!

Friday, June 2, 2017

Towards Elastic on Security Onion: Technology Preview 2 (TP2)

UPDATED 2018/04/09! We've released a newer version!
https://blog.securityonion.net/2018/04/security-onion-elastic-stack-general.html

We recently announced our move towards the Elastic stack:
http://blog.securityonion.net/2017/03/towards-elk-on-security-onion.html

In the last few weeks, we've made tremendous progress, so it's time for our second technology preview (TP2)!

Changes from the last Technology Preview
  • upgraded from Elastic 2.4.4 to 5.4.0
  • Elasticsearch, Logstash, and Kibana each run in their own Docker containers
  • lots more dashboards
  • new Logstash parsers to support more log types
  • IPv6 support
  • experimental script to migrate data from ELSA to Elastic
  • Squert now leverages the same single sign on as Kibana and CapMe

Warnings and Disclaimers
  • This technology PREVIEW is PRE-ALPHA, BLEEDING EDGE, and TOTALLY UNSUPPORTED!
  • If this breaks your system, you get to keep both pieces!
  • This script is a work in progress and is in constant flux.
  • This script is intended to build a quick prototype proof of concept so you can see what our ultimate Elastic configuration might look like.  This configuration will change drastically over time leading up to the final release.
  • Do NOT run this on a system that you care about!
  • Do NOT run this on a system that has data that you care about!
  • This script should only be run on a TEST box with TEST data!
  • This script is only designed for standalone boxes and does NOT support distributed deployments.
  • Use of this script may result in nausea, vomiting, or a burning sensation.

Enough disclaimers?  Let's do this!

Start with a disposable TEST VM with the following minimum requirements:

  • 2 CPU cores
  • 8GB RAM
  • 20GB virtual hard drive
  • (1) management interface with full Internet access
  • (1) sniffing interface (separate from management interface)
  • Security Onion 14.04.5.2 ISO image installed
  • Setup ran in Evaluation Mode
Download the script:
wget https://raw.githubusercontent.com/Security-Onion-Solutions/elastic-test/master/securityonion_elsa2elastic.sh
Run the script with sudo privileges:
sudo bash securityonion_elsa2elastic.sh
Please read through all the WARNINGS and DISCLAIMERS and ONLY proceed if you agree.

The script will take at least 10 minutes depending on the speed of your hardware and Internet connection.  At the end of the script, it will prompt you to access Kibana via the following URL:
https://localhost/app/kibana

You should then see our new Security Onion login window.  Enter the same credentials that you use to login to Sguil/Squert.  This login window will provide single sign on for Kibana, Squert, and CapMe to allow seamless pivoting to full packet capture!

Once logged into Kibana, you will automatically start on our Overview dashboard and you will see links to other dashboards as well.  As you search through the data in Kibana, you should see Bro logs,  syslog, and Snort alerts.  Logstash should have parsed out most fields in most Bro logs and Snort alerts.  Notice that the search panels at the bottom of the dashboards display the source_ip and destination_ip fields with hyperlinks.  These hyperlinks will take you to a dashboard that will help you analyze the traffic relating to that particular IP address.  UID fields are also hyperlinked.  Clicking on a UID hyperlink will start a new Kibana search for that particular UID.  In the case of Bro UIDs this will show you all Bro logs related to that particular connection.  Each log entry also has an _id field that is hyperlinked.  This hyperlink will take you to CapMe, allowing you to request full packet capture for any arbitrary log type!  This assumes that the log is for tcp or udp traffic that was seen by Bro and Bro recorded it correctly in its conn.log.

Previously, in Squert and Sguil, you could pivot from an IP address to ELSA.  Those pivots have been removed and replaced with a pivot to Kibana.

For screenshots, please see the Screenshot Tour at the bottom of this post.

TODO
For the current TODO list, please see:
https://github.com/Security-Onion-Solutions/security-onion/issues/1095

Feedback
We're releasing this now because we want to get your feedback as early as possible in this project.  Please try it out and send your feedback to our mailing list:
https://github.com/Security-Onion-Solutions/security-onion/wiki/MailingLists

What do you think?

What works well?

What needs to be improved?

Any questions or other comments?

Thanks in advance for any and all feedback!

Want to show your support for Security Onion?
Security Onion t-shirts are available in our CafePress store!
http://www.cafepress.com/securityonion/11820053

Need Security Onion Training?
We offer both onsite and online training (although please note that Elastic will not be added to training classes until we reach a stable release):
https://securityonionsolutions.com/onsitetraining
https://securityonionsolutions.com/onlinetraining

Conference
Our annual Security Onion Conference will be Friday September 15, 2017:
https://securityonion.net/conference

Hope to see you there!

Screenshot Tour

Overview Dashboard


Bro Notices Dashboard


HIDS Alerts Dashboard


NIDS Alerts Dashboard 

NIDS alerts now contain the rule that generated the alert

Bro Connections Dashboard



Bro Connections Traffic Map


IPv6 Support


Bro DCE/RPC Dashboard


Bro DHCP Dashboard


Bro DNP3 Dashboard


Bro DNS Dashboard 


Bro Files Dashboard




Bro FTP Dashboard


Bro HTTP Dashboard


Bro Intel Dashboard


Bro IRC Dashboard


Bro Kerberos Dashboard 


Bro Modbus Dashboard



Bro MySQL Dashboard


Bro NTLM Dashboard


Bro PE Dashboard


Bro RADIUS Dashboard


Bro RDP Dashboard


Bro RFB Dashboard


Bro SIP Dashboard


Bro SMB Dashboard


Bro SMTP Dashboard


Bro SNMP Dashboard


Bro Software Dashboard


Bro SSH Dashboard


Bro SSL Dashboard


Bro Tunnels Dashboard


Bro Weird Dashboard


Bro X.509 Dashboard


Host Logs Dashboard

Stats Dashboard

Each Dashboard has a search panel with important fields hyperlinked

Clicking the Source IP hyperlink takes you to the Indicator Dashboard searching for the Source IP

Click the Destination IP hyperlink takes you to the Indicator Dashboard searching for the Destination IP

Clicking the UID hyperlink takes you to the Indicator Dashboard searching for that UID


Clicking the _ID hyperlink takes you to CapMe for full packet capture


Clicking the Squert link in Kibana takes you directly to Squert thanks to Single Sign On


SSO allows you to pivot seamlessly from Squert to CapMe for full packet capture


New scripts to manage Elastic stack

Search This Blog

Featured Post

1-month End Of Life (EOL) reminder for Security Onion 2.3

In October of last year, we announced the End Of Life (EOL) date for Security Onion 2.3: https://blog.securityonion.net/2023/10/6-month-eol-...

Popular Posts

Blog Archive